HomeCalcy
HomeRooms › Standard door size

Measurement of a Standard Door

ChartStandard dimensions — nothing to enter.

A standard interior door is 80 inches tall (6 ft 8 in) and 28, 30 or 32 inches wide; the standard front door is 36 × 80 inches. Everything below is the door slab; the rough opening in the wall is 2 inches wider and 2½ inches taller.

Standard door sizes

DoorWidthHeightThicknessRough opening (W × H)
Interior — bedroom, bathroom28, 30 or 32 in (71, 76, 81 cm)80 in (203 cm)1⅜ in30–34 × 82½ in
Interior — closet, utility24 in (61 cm)80 in1⅜ in26 × 82½ in
Interior — accessible36 in (91 cm)80 in1⅜ in38 × 82½ in
Exterior — front door36 in (91 cm)80 in1¾ in38 × 82½ in
Exterior — tall front door36 in96 in (244 cm)1¾ in38 × 98½ in
Exterior — double entry72 in (two 36 in)80 in1¾ in74 × 82½ in
Sliding patio door72 in (183 cm)80 in74 × 82½ in
Bifold closet (pair)24, 30, 36 in80 in1⅛ inopening + ½ in
Garage — single96 or 108 in (8 or 9 ft)84 in (7 ft)same as door
Garage — double192 in (16 ft)84 in (7 ft)same as door

Older homes (pre-1970) often have 78 in doors and odd widths; measure the slab before ordering.

How this was worked out

Door sizes are quoted as width × height of the slab, in inches, and written as feet-inches in the trade: a 2/8 door is 2 ft 8 in (32 in) wide; a 6/8 door is 80 in tall. The slab is what you buy; the frame around it is the jamb, and the hole in the wall is the rough opening.

The rough opening is the slab width plus 2 inches (for the jamb and shims) and the slab height plus 2½ inches, measured from the subfloor. Pre-hung doors come with the jamb; you size the rough opening to them.

Measuring an existing door: width across the slab at the middle, height from top to bottom edge, thickness at the edge. Then the jamb depth — the wall thickness the frame sits in, 4⅝ in for a 2×4 wall with drywall, 6⅝ in for a 2×6 wall.

Sources. US residential door sizes as sold by the major manufacturers and home centres; rough-opening allowances from manufacturer installation guides. Accessible width from the ADA 32 in clear-opening rule. Last reviewed 28 August 2026.

Common questions

What is the standard size of an interior door?

80 inches tall and 30 or 32 inches wide for a bedroom; 28 inches for a small bathroom; 24 inches for a closet. Thickness is 1⅜ inches.

What is the standard front door size?

36 inches wide by 80 inches tall, 1¾ inches thick. Tall entries use 96-inch doors.

What is the rough opening for a 32 inch door?

34 inches wide by 82½ inches tall, for a pre-hung door with a standard jamb.

How thick is a standard door?

Interior doors are 1⅜ inches; exterior doors are 1¾ inches.

Next

Calculator + chartHow to measure a room for furnitureWill it fit, will it get through the door, and how much walkway is leftCalculator + chartHow to read a tape measureEvery mark on the tape, and a reader that turns any mark into a fraction, decimal and millimetresCalculator + chartSquare footage calculatorAny room, any unit, including L-shapesCalculator + chartHow to measure for blindsInside or outside mount — enter your six measurements and get the size to order